Hatseflats Design
A 15ft Pram for Dinghy Cruising
20160301
20160601
20160701
20160711
20160801
20160901
20160915
20161201
20161215
20170107
20170113
20170114
20170119
20170120
20170122
20170123
20170131
20170208
20170219
20170220
20170221
20170224
20170225
20170318
20170328
20170329
20170408
20170409
20170417
20170420
20170421
20170422
20170423
20170424
20170425
20170426
20170427
20170501
20170509
20170521
20170525

Hatseflats Hull Build

Fitting Out Hatseflats

Sailing Hatseflats

Building TooPhat

<< >>

20160801

During our holidays in France I narrowed down the criteria for the new cruising dinghy:
  • The cruising dinghy will be on a trailer at our home with the rig lying in the boat under cover. This means that all spars must fit in the hull.
  • Short trips will be made from a trailer slip within 50km from my home (30 minutes drive)
  • The dinghy will be sailed singlehanded most of the time.
  • When arriving at the slip, it must be possible to sail within 15 minutes (parking car and trailer and changing into sailing gear excluded). Putting the boat into the water should take about 5 minutes. Rigging mast, sail and rudder should take no more than 10 minutes


20160801_DSC00067.JPG Ilur (Vivier):the reference for sail and oar.
20160801_WB106-4.JPG Winkle Brig: too heavy for trailering.
20160801_img_67491.jpg Ness Yawl (Oughtred):too big for singlehanding